Laser Cutting Machine Nozzle
In the field of laser cutting industry, laser cutting machine is the main equipment, and the cutting process is carried out by emitting a laser beam. In this process, the nozzle is a component that cannot be ignored.
In the field of laser cutting industry, laser cutting machine is the main equipment, and the cutting process is carried out by emitting a laser beam. In this process, the nozzle is a component that cannot be ignored. If the cutting conditions need to be changed due to poor nozzle condition, it is better to replace with a new nozzle.
Nozzle aperture selection:
Common nozzle apertures are φ1.0mm, φ1.5mm, φ2.0mm, φ2.5mm, φ3.0mm and so on. At present, two kinds of nozzle apertures are often used: φ1.5mm and φ2.0mm. The difference between the two is:
1. When using a φ1.5mm diameter nozzle when cutting thin plates of 3mm and below, the cutting surface will be thinner; when using a φ2.0mm diameter nozzle, the cutting section will appear rough, and there will be obvious stains at the corners.
2. When cutting plates with a diameter of 3mm or more, due to high power and high heat, when cutting for a long time, if a 1.5mm diameter nozzle is used, the gas flow diffusion area is small, so the use is not stable, but it is basically usable; it is recommended Using φ2.0mm diameter nozzle, the gas flow diffusion area is large, and the gas flow rate is uniform, so the cutting is more stable.
3. Usually, the nozzles with diameters of φ2.5mm and φ3.0mm are only suitable for cutting thick plates of 10mm and above. To sum up, the size of the nozzle aperture has a serious impact on the cutting quality and the quality of the hole. At present, the nozzles with diameters of φ1.5mm and φ2.0mm are mostly used for laser cutting.
FAQ
Q: Can you do our own packaging?
A: Yes, you just need to provide the packaging design and we will produce the product you want.
Q: How many different types of products does your company produce?
A: Now we have more than 1000 products. We have strong OEM advantage, just give us the actual product you want or your idea and we will make it for you.
Q: When can I get the price?
A: Usually we will quote within 8 hours after receiving your inquiry.
Q: What is your MOQ?
A: If we have products in stock, there is no MOQ. If we need to produce, we can discuss MOQ according to customer's specific situation.
Hot Tags: laser cutting machine nozzle, China, suppliers, manufacturers, customized, price, cheap, in stock, free sample, HSG Laser Nozzle, Laser Cutting Machine Nozzle, HAN S LASER Nozzle, Bystronic Laser Nozzle, TRUMPF Laser Nozzle, Laser Cutting Nozzle
