The plasma Nozzle

Arc pulling may occur at the beginning and end of the cut. If this happens, the arc will cut into the sidewall of the nozzle, causing damage to the nozzle. When performing edge arcing, start the plasma arc with the nozzle hole centered exactly above the edge of the workpiece. It is important to keep this in mind during punch/plasma operations starting from the center of the pierce. In such applications, the arc should be started from the edge rather than the center of the perforation. Arc draw can also occur at the end of the cut if the torch has been programmed to deviate from the sheet when the arc is on, or if the "leader" follows the kerf of the last cut in the metal. Proper timing and pinout of the arc-off signal can minimize this effect.

Product Details

Excellent process flexibility for cutting, beveling and marking of metal thicknesses up to 160 mm.

Main Advantage

New HDi thin stainless steel technology

● Excellent cut quality and stability

● Maximize production efficiency

● Minimize running costs

● Unmatched reliability

Operating Parameters

● Mild steel cutting capability

Slag-free cutting capacity 16 mm

Production perforation capacity 32 mm

Maximum cutting capacity 38 mm

● Stainless steel cutting capability

Production perforation capacity 20 mm

Maximum cutting capacity 25 mm

● Aluminum cutting capability

Production perforation capacity 38 mm

Maximum cutting capacity 25 mm

Hot Tags: The plasma Nozzle, China, suppliers, manufacturers, customized, price, cheap, in stock, free sample, hyp 220183, 220181 hyp, 220757 Retaining Cap, hyp220990, plasma cutting nozzle p80, P80 Nozzle