Plasma Nozzles
By reducing the effects of ramp down errors, XPR consumables can last up to 3 times longer than older and competing systems.
Material type of plasma cutting
Any conductive metal, including stainless steel and aluminum
Ability to handle rusted, painted and mesh metal workpieces
Ideal thickness
Mild steel, stainless steel and aluminium from 26 GA to 50 mm
Capable of cutting stainless steel and aluminium up to 182 mm thick; some secondary machining will be required
Cutting quality
1.Tolerances in the range of +/- 0.38 mm to 0.5 mm, with an average edge angle of 2° to 3° for steels less than 10 mm thick; 1° for steels 12 mm to 38 mm; less than 1° for steels 50 mm 2.Heat affected zone is narrow, generally less than 0.25 mm
3.Proper selection of cutting process and gas will greatly reduce edge hardening for excellent weld performance
4.Relatively smooth edges with smooth torch motion
5.Dramatically reduce slag (resolidified metal) on steel while reaching rated capacity
*Tolerances will vary depending on material type and thickness, part geometry, and the overall design and quality of the cutting system. The tolerances listed here are generally accepted assuming a good quality cutting table with good motion control. Different cutting tables will have different cutting performance even if they are equipped with the exact same cutting components.
Hot Tags: plasma nozzles, China, suppliers, manufacturers, customized, price, cheap, in stock, free sample, plasma cutting nozzle p80, plasma electrode p80, 420044 hyp, 420045 Retaining Cap, 220176 Retaining Cap, 020608 hyp
